Product name

Jean printing paste    咨询热线：13798943124谢燕红     QQ：1013292912  

State

Paste

Packing

25KG/drum for white,  20KG/drum for clear

Storage

6 months in cool place

Application

Suitable for jean, nylon, TPU, PU etc.

Features

1. Stone washing、snow washing、poaching、ferment washing、acid-washing,

thermophilic digestion resistance.

2. Extra fastness

3. SGS detecting passed, no PVC, no heavy metal, no NPEOs

Mix proportion

Light: White printing paste 70-80% + Clear printing paste 20-30% + pigment ?% + fixing agent 3%

Deep: White printing paste 20-30% + Clear printing paste 70-80% + pigment ?% + fixing agent 3%

Printing process

1. Printing with clear printing paste for 1-2 times

2. Mixing with white printing paste, clear printing paste, pigment and stirring them evenly.

3. Printing again for 3-4 times (3-4 scrapes per time).

4. Drying it in room temperature, or baking for 1-3 minutes under 150-180℃

5. Finish.

Attentions

1. Please drying the paste surface with cold air each time before re-printing.

2. The pigment is max 12%, otherwise it’ll be easily faded.

3. 1-3% curing agent is suggested to make better washing ability.

品名

特强石磨牛仔浆             咨询热线：13798943124谢燕红     QQ：1013292912            

外观

糊状

包装

白胶浆25KG/桶，透明浆20KG/桶

贮存期

常温下6个月

应用

牛仔布（涂层布，压光布除外）, 尼龙布，也可用于TPU、PU等皮革等

卖点

1. 耐强石磨洗、雪花洗、漂洗、酵素洗、酸洗、耐高温蒸煮、蓝天白云等

2. 不粘手超柔软，高亮度

3. 符合美国ASTM对邻苯二甲酸脂和欧盟EN71 Part 3对重金属含量的要求

调配比例

印浅色：牛仔白胶浆70-80% + 牛仔透明浆20-30% + 固化剂3% + 色种？%

印深色：牛仔白胶浆20-30% + 牛仔透明浆70-80% + 固化剂3% + 色种？%

工艺流程

1. 丝网选用80-100目，用丝印硬方刀75度刮印, 以透明浆打底1-2次

2. 将白胶浆，透明浆，色种，固化剂搅拌匀印2-3次

3. 24-48小时自然干燥，或150-180度焙烘1-3分钟

注意事项

1.加入固化剂的石磨胶浆必须在4~8小时内用完     

2.每色第一板必须用力刮4~6刀(浆体充分进入纤维深处才能确保特强牢固度)!
3.固化剂比例必须准确并充分搅拌均匀!
4.必须保证浆层完全干透才能进行洗水!

  咨询热线：13798943124谢燕红     QQ：1013292912